Etched Plaque Design Selection
Precision and Detail, Etched in Excellence. At Buccacio Sculpture Services, our etched plaques offer unmatched intricacy, capturing fine details and delivering a refined, professional look. Perfect for commemorations, awards, and signage, they blend elegance with durability.
Finishes and Textures
ALUMINUM
Aluminum Association Standard: Alloy 6061
Standard-sized sheet:48” W x 96” L
Polished Aluminum
Satin Aluminum
Stainless Steel
Standard: Alloy 304
Optional: Alloy 316
Standard-sized sheet:48” W x 96” L
Satin
Polished
Orbital
ZINC
Standard-sized sheet:24” W x 36” L
Available thickness: .064”, .125”, .153”
Bronzetone
Brasstone
Silvertone
Two Color Tone
COMMERCIAL BRONZE
Copper Development Association Alloy C22000; 90% Copper, 10% Zinc
Standard-sized sheet:48” W x 96” L
Dark Oxidized Commercial Bronze
Light Oxidized Commercial Bronze
Medium Commercial Bronze
Satin Oxidized Commercial Bronze
BRASS
Copper Development Association Alloy C26000; 70% Copper, 30% Zinc
Standard-sized sheet:36” W x 96” L
Satin
Brass
Polished
Brass
Medium Oxidized Brass
Light Oxidized
Brass
Dark Oxidized
Brass
Copper
Polished
Copper
Satin
Copper
Medium Oxidized Copper
Light Oxidized
Copper
Dark Oxidized
Copper
MUNTZ
Copper Development Association Alloy C28000; 60% Copper, 40% Zinc
Standard-sized sheet:48” W x 96” L
Satin
Muntz
Polished
Muntz
Medium Oxidized Muntz
Light Oxidized
Muntz
Dark Oxidized
Muntz
Colors
These Colors & Coatings are either recommended for bronze or for aluminum. Custom-matched colors are a $110 additional (minimum) charge and require the PMS Color Matching System numerical designations.
Colors
Black
White
Light Bronze M-311
Medium Bronze M-312
Dark Bronze M-313
Golden Bronze M-40
Light Grey M-5
Medium Grey M-8
Dark Grey M-10
Ivory M-58
Cream M-71
Beige M-65
Green M-38
Orange M-102
Red M-107
Dark Red M-115
Maroon M-118
Dark Brown
Light Blue M-20
Medium Blue M-25
Dark Blue M-28
GRAPHICAL SPECIFICATIONS
Here are six ways your etched metal signage can appear along with their specifications.
ETCHING DEPTH
Depths may range from .010″ to .020″ depending upon size, detail of artwork and material selected.
HALFTONE
Halftone photographs have a shallow etching depth of .003″ to .007″. The photo must be 300 dpi.
RECESSED GRAPHICS
In-filled with a painted color. Brass alloys may be chemically oxidized to appear darker.
RAISED GRAPHICS
Background painted or chemically oxidized, depending upon the material. Small lettering with fine serifs is not recommended.
STENCIL CUT GRAPHICS
Ideal for signage with dissimilar metals. Requires backlighting or it exposes the installation wall. Also used for the accurate placement of holes and cut-out areas.
Mounting
STUD MOUNT
Recommended for concealed mounting to solid walls. Standard length for threaded studs is 11⁄2”. Custom lengths available. Back of etching is drilled and tapped if plaque is 1⁄4” or thicker. Studs are spot welded on the back if plaque is less than 1⁄4” thick. Studs are not recommended on 1⁄16” thickness or less due to “dimpling.”
Through The Face Mount
Specify type of fastener, location and size of holes and whether or not the holes must be countersunk. Hardware provided upon request. Specify screw type, material, size, length, head style and finish.
Borders and Edges
Classic, contemporary, and Ornamental borders to complement your signage.
CORNERS
90° is standard unless otherwise specified.
The standard radius is 1/2″ unless otherwise specified.
EDGES
90° is standard unless otherwise specified.
The standard bevel is 45° and is applied to one-half the material thickness. Not available on 1/16″ thickness.